White Ice FG series

Food Grade Heat Sink Compound
(NSF Registered)
Product Description:

White Ice FG series is a Non-Reactive, Silicone, Thermally Conductive food grade thermal grease with low thermal resistance and a soft, non-flowable consistency. This product is formulated with FDA (Food & Drug Administration) approved ingredients in compliance with CFR, Title 21 paragraph 178.3570 of the FDA guidelines and NSF Registered. This product is acceptable as incidental food contact for use in and around food processing areas.

Key Features and Benefits:
  • Good Thermal Performance- ( 1.0 W/m °k)
  • Low Interface Thermal Resistance. – ( 0.05 °C-In2 /W)
  • Service Temperature up to 300C
  • Low bleed and evaporation
  • Non-Toxic/ NSF Registered
  • Re-workable/Easy to Remove
  • Easy to Apply by Dispensing or Screen Printing/Stencil
Typical Applications:

White Ice food grade Heat Sink Compound is applied to the any electronic devices for heat transfer which is located in and around food processing areas. Also industrial applications include mounting studs of transistors, diodes and silicone controlled rectifiers. In these situations, a small amount of the thermal grease is applied using screen printing/stencil methods. It is also used in mounting semiconductor devices; thermoelectric modules; power transistors and diodes; coupling entire heat generating assemblies to chassis; heat transfer medium on ballasts; thermal joints; thermocouple wells; mounting power resistors; and for any devices where efficient cooling is required in major industries including, electronic (computer, appliance, wireless, etc.), automotive and electrical.


Syringes (3cc, 10cc, 30cc). Jars (8 oz. & 1 Kg). Cartridges (6 oz.& 300cc).
1 gallon & 5 gallon pails

PropertyTest Method 510FG610
Type SiliconeSilicone Free
NSF Registration Number.
Company Number: N06854
Special Future Low viscosity.
General purpose
High Temperature. Rated up to 300C
@ 25°C, PaS
Specific GravityASTM D7922.22.9
Shelf Life 5 years5 years
Operating Temperature Range.°C -55°C to 200°C-55°C to 300°C
Thermal Conductivity
ASTM D54700.81.0
Thermal Resistance
( °C-in²/W)
ASTM D54700.050.05
Breakdown Voltage (KV/mm)ASTM D1491514
Dissipation Factor (1KHz)ASTM D1500.00210.0020
Volume Resistivity (Ohm-cm)ASTM D25710^1410^14